







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Farmers Branch
Farmers Branch is landlocked and built out, which means the fence work here rarely starts on raw ground. It starts on a survey. Most of what we quote in Farmers Branch is a replacement fence tied to a teardown-and-rebuild permit or a lot-line adjustment on a 1950s – 70s ranch lot, and on those tight parcels the survey and the utility locates set the scope before a single post goes in. We know the difference between a fence that follows an old easement and one that follows the actual property line. Call (844) 761-9152 for a free estimate.
Why Farmers Branch Homeowners Call Construction McKinney for Fence Installation

Our technicians have up to 10 years of experience, and on a Farmers Branch lot that experience usually shows up first in the questions we ask: Where’s the survey? Has the city located utilities along that easement? Is this fence replacing one that was knocked down for the rebuild, or is it going in after the general contractor’s final inspection?
Farmers Branch lots are tight and full of mature trees the city protects. A fence line that looks obvious to the eye can be a foot off the platted line, and digging a post through a buried utility sleeve is an expensive way to find that out. We walk the property, pull the survey, and confirm locates before anyone touches a shovel. That’s the local knowledge that keeps a fence budget from moving.
Farmers Branch is also a small, fully built-out inner-ring suburb sitting at ZIP 75234, so most of our work here is replacement and redevelopment rather than new ground. We treat the scope the way it should be treated: in writing, with allowances named, so the draw schedule matches the actual work. Free estimates, written line-item quotes, and permits pulled and inspections passed are standard on every Farmers Branch job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Farmers Branch
Wood Fence
Wood is still the default on the 1950s – 70s ranch parcels around Farmers Branch, and the reason is simple: it matches the house and it handles a tight lot well. But the black-clay soil here has one habit that matters more than boards or stain. It swells in wet spring and shrinks through the dry summer, and a post footed shallow will lean within a couple of seasons. We set footings below the active clay zone, so the fence stays plumb instead of racking. Our fence installation scope spells out post depth and concrete before we quote.

Privacy Fence
A privacy fence on a Farmers Branch lot usually runs up against something you didn’t plan for: a mature tree trunk on your side of the line, or a redevelopment fence next door pressed up against an easement. We build the run around those, not through them, and we keep the height consistent so the neighbor side reads as one clean line. Six-foot board-on-board is the common call on these parcels, and we talk through the trade-off on airflow before you commit.

Fence Gates
Gates are where a fence either works or gets annoying. On a Farmers Branch ranch property with a driveway on one side and a side yard on the other, the gate position and swing direction do most of the work, and the hinge hardware does the rest. We use heavy-duty hinges and a positive latch, and we set the gate post deeper than the line posts because it takes the most load. A gate that sags is almost always a post that was footed too shallow in this soil, not a bad gate.

Aluminum Fence
Aluminum is the right answer for a lot of Farmers Branch front-yard runs and pool perimeters, where you want a boundary without a wall. It’s rust-resistant, which suits the wet-spring cycle in North Texas, and it holds its lines when the ground moves under a footing. We fit Ameristar and Jerith aluminum on these jobs, and the style choice matters as much as the material when the fence fronts a street.
Trusted Brands We Service in Farmers Branch
We work with a portfolio of 50+ named brands across the categories we install, and on fences that means Ameristar and Jerith aluminum, Bufftech vinyl, and ActiveYards systems. We don’t claim to stock parts locally or run our own warehouse. What we do is specify the product your lot actually calls for and get it to the job on a schedule that matches the build. On a Farmers Branch rebuild in the middle of redevelopment, coordinating material delivery with the general contractor’s timeline is half the job. On a straight replacement, we order to the measured run and have it ready before the first post is pulled.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Farmers Branch Homes
- Clay-soil heave under post footings. The wet-spring/dry-summer cycle here causes posts to lean and panels to rack, especially on fences set shallow on the original 1960s – 70s lots. The fix is a footing below the active clay zone, not a brace wedged into the existing one.
- Tree-root and tight-lot conflicts. Mature trees on established Farmers Branch parcels push into fence lines, and redevelopment of an adjacent lot can put a new fence right up against an easement that has to be located before digging. We plan the run around both.
- Rebuild-era lot-line confusion. A fence replacement tied to a tear-down or remodel on a landlocked Farmers Branch lot often needs the survey re-checked and the scope coordinated with the general contractor’s permits and inspection sign-off. Otherwise the fence goes in on the wrong line.
- Replaced fences that skip the locates. Older utility infrastructure runs under more of Farmers Branch than owners realize, and digging a footing blind is how a fencing job becomes a utility repair. We confirm locates on every job before the first hole.
Pricing for Fence Installation in Farmers Branch, TX

Fence pricing here is set by the lot, not just the footage. A tight parcel with mature trees and an easement to work around uses more post-setting and more labor than an open run, and the survey and locates are part of the scoping before we quote. These are typical estimated ranges for Farmers Branch, not a final number:
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
What moves the number up the range: deep footings on clay, a gate or two with heavy hardware, a run that has to snake around tree roots, and any survey re-check on a rebuild lot. What keeps it lower: a straight run with clean access and no conflicts. The written estimate sets the final price, and we put the scope and allowances in writing before the draw schedule is set. Call (844) 761-9152 for your free estimate.
We Also Serve Cities Near Farmers Branch
Our fence installation work reaches past Farms Branch into the neighboring cities. If you’re in Addison, Carrollton, Richardson, or Lewisville, we quote the same way: survey first, scope in writing, footing depth set for the clay. For a closer look at how we run a fence project end to end, see our fence installation work, and call (844) 761-9152 to schedule a free estimate.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Farmers Branch

Drainage on an open lot is handled by keeping the fence line from becoming a dam. On a Farmers Branch parcel, the wet-spring/dry-summer cycle means a solid board fence set tight on graded ground can trap runoff against a footing and soften the soil under it, so we plan a small gap at the bottom of the run and set the footings so water drains away from them rather than pooling. We walk the existing grade and note the low spots before we quote, and if the lot needs regrading to keep the fence line dry, that goes in the scope. Call (844) 761-9152 for an exact quote. Estimates are free.
Fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7. A call outside dispatch hours is booked into the next opening. For a planned fence job we walk the property and quote on the first visit, and the install goes on the schedule once the estimate is signed.
Yes, we quote across Farmers Branch, from the established ranch parcels to the redevelopment strips along the I-35E frontage and Valley View. The city’s older commercial and light-industrial buildings are in ongoing redevelopment, so a scope can mix a residential fence replacement with a commercial upfit in the same project, and we handle that coordination through the general contractor’s permits and inspection sign-off.
Sometimes, when it’s a gate or a single panel that failed and the material is on hand. Most Farmers Branch fence replacement is a planned job because the survey and locates have to be confirmed before digging on a tight lot. Call (844) 761-9152 and we’ll tell you straight whether it’s a same-day fix or a scheduled install.
Not usually higher, but the scoping is different. Farmers Branch is landlocked and built out, so a replacement fence here almost always needs the survey re-checked and the utility locates confirmed before digging on a tight ranch lot with mature trees. Those steps add planning time rather than a premium. Our typical estimated ranges are the same across the neighboring cities, and the written estimate sets the final price.
Yes, our workmanship warranty travels with the job wherever it’s installed in Farmers Branch. Material warranties come from the manufacturer, and we walk through which line carries what before you choose. A fence that racks in this clay is usually a workmanship issue at the footing, and that’s covered. Call (844) 761-9152 to talk through your options. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Ready for a fence that holds its lines in Farmers Branch? Call (844) 761-9152 for a free estimate. We’ll walk the property, check the survey and locates, and put your scope in writing before the draw schedule is set. Licensed & insured, fixed pricing with no change orders, permits pulled and inspections passed, and a workmanship warranty behind the install. Estimates are free, and the written estimate sets the final price.
Written by the team at Construction McKinney.












