







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Richardson
Fence work in Richardson is not the same as fence work in the newer suburbs north of town. The lots are older, the clay is active, and the fence line often runs against a slab edge, an outbuilding footing or a buried utility nobody mapped. If you own a home in Richardson, you need a fence contractor who understands that ground before the first post goes in. Call (844) 761-9152 and we’ll set up a free, written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richardson Homeowners Call Construction McKinney for Fence Installation

Most fence quotes in Richardson start with a linear-foot number and end with a surprise. Ours starts with the ground. Before we quote a run, we walk the line, check the grade that drains toward or away from the fence, and look for the slab edge, shed footer or utility stub that will get in the way of digging. On established 1960s-1980s lots around the Central Expressway corridor, that walk usually tells us more about cost than the board style ever will.
Construction McKinney works across the full residential envelope, from the driveway to the roofline, so a fence job rarely means bringing in a second contractor when a gate starts hitting a paver apron or a privacy panel has to tie into a shed wall. Our technicians have up to 10 years of experience, and we’re licensed and insured. Estimates are free and written line-item. We can also work with your insurer if a storm-damaged run needs to be documented.
We cover Richardson as part of our core service area, alongside Plano, Addison, Carrollton and Allen. That means a real walkthrough at your property, not a phone quote based on a satellite image.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Richardson
Wood Fence in Richardson
Wood is still the workhorse material on Richardson’s ranch homes, and it’s the one most sensitive to what’s underneath. The blackland clay here swells and shrinks with the wet-dry cycle, so a cedar or pine post set too shallow will heave, rack and pull its collar loose within a couple of seasons. We set posts below the active soil zone and pay attention to how the line drains, because that single decision decides whether your fence looks the same in year five.

Privacy Fence in Richardson
A privacy fence is the request we hear most on the tight backyard lots west of US 75, where the neighbor’s second story looks straight down into a small yard. Board height, board gap and gate location all matter, but so does bracing. A tall privacy run with a light gate frame will sag in clay. We frame ours heavier than the panel requires, which costs a little more in material and saves a rebuild later.

Chain Link Fence in Richardson
Chain link makes sense where the goal is containment rather than looks: a dog run, a stripped commercial pad, a utility easement that needs to stay clear. Set water collects at a footing in clay, and steel rusts fastest right at that collar, so we set footings above the grade that traps water and check the run for low spots before drilling. Short runs with multiple gates are priced per gate, and that shows up in the written estimate, not as an add-on.

Aluminum Fence in Richardson
Aluminum suits the Richardson homes where a wood privacy fence would block the view or look too heavy against the brick. Powder-coated panels in ornamental styles hold their finish far better than bare steel in North Texas heat, and they don’t need the annual sealing a wood run does. On a corner lot or a run facing an alley, aluminum gives you the clean line without the maintenance schedule.
Trusted Brands We Service in Richardson
Brand choice on a fence is mostly about the coating, the panel spacing and how the hardware holds up. We work with Ameristar and Jerith for ornamental aluminum and Bufftech and ActiveYards for vinyl profiles, and we match the material to what the Richardson lot actually needs rather than the other way around. If you’ve seen a style you like, bring the name and we’ll tell you whether it fits the ground and the grade. We don’t claim to stock parts locally; we specify the product for the job and quote it line by line so you can see exactly what’s going into your yard.
Common Fence Installation Problems We See in Richardson Homes
- Posts set too shallow in blackland clay. The soil swells after wet spells and shrinks hard in a dry summer, so shallow concrete collars pull loose and the whole run racks. Gates end up dragging within a season or two, long before the boards go bad.
- Fence lines graded flat or sloping toward the fence. When a run sits in a swale or the grade traps water at the base, wood posts rot faster and chain link footings rust at the collar. A short grade correction before setting posts usually saves the fence.
- Buried utilities and slab edges on older lots. Richardson’s 1960s-1980s homes often have an unmarked utility line, a slab edge or a shed footer right where the new run lands. We locate and work around these rather than cutting through them.
- Storm and hail damage to gate hardware and brace frames. Spring hail and high wind in North Texas take the gate first, bending the brace and stripping the hinges before the panel is damaged. We check and repair the gate frame as part of any storm-related fence repair.
Pricing for Fence Installation in Richardson, TX

A typical vinyl fence installation in Richardson runs $3,500 – $9,000, and a typical aluminum fence installation runs $4,000 – $10,000. Those are estimated ranges for the market here, not a quote for your yard. What moves the number is post depth in the clay, whether the grade needs correction, gate count and bracing, whether a utility has to be located before digging, and how easily equipment can reach the fence line. The written estimate sets the final price, line by line, with no change orders once work starts.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Call (844) 761-9152 for a free written estimate on your Richardson run.
See the difference
Before
After
Before
After
Before
AfterWhy the Richardson Ground Changes the Job
Here’s the thing about fencing in Richardson that you won’t see in a linear-foot comparison: the fence line sits on North Texas blackland clay, and that clay moves. It swells with wet weather and shrinks hard in a dry summer, and that motion works on every post collar in the run. Posts set shallow in this soil heave and rack faster than they would in the sandy ground north of the metroplex, which means post depth and drainage along the fence line matter more than board style on the established 1960s-1980s lots here. A cedar privacy run with perfect boards and shallow footings will lean. A plainer run set below the active soil and graded to drain will stand.
That’s also why the typical fence call in Richardson often starts with a gate that drags or a run of posts leaning after a dry spell. The blackland clay has pulled away from the concrete collars, and the original posts were set too shallow for the shrink-swell cycle. A qualified local fence pro walks the line, checks post depth and which way the grade drains, then resets the posts below the active soil zone, re-plumbs the run and rebuilds the gates with proper bracing before any new boards go on. Skipping that step is how a fence gets rebuilt twice.
Richardson’s housing stock makes this sharper than in newer suburbs. Most of the city is single-story ranch and traditional brick homes on slab foundations, built out in one suburban wave, so whole neighborhoods of fences are reaching the same age at more or less the same time. Along the Central Expressway corridor you also get pockets of 1970s-80s office and light-industrial buildings, and fence work there means tenant-improvement runs, security perimeter panels and a different set of access constraints. If you’re renovating an older slab home and the fence ties into an addition, a gate or a shed footing, our fence installation work is scoped alongside the rest of the project, not bolted on afterward.
Permitting split matters too. Fences in the city of Richardson inside city limits fall under the city’s rules, while acreage and unincorporated pockets along the edge of the county can fall under county permit requirements and setbacks that are often more about the fence’s proximity to a property line, a septic field or a well than about the fence itself. We don’t guess on this. Before we quote an acreage-side job we ask where the fence will run and confirm the applicable rule with the right permitting office, and a property owner who calls their county or city building department first always gets a cleaner quote. If a permit or inspection is required, we build that into the scope up front.
Access and equipment is the other cost lever on acreage and open lots. A run along an open lot with a long material haul means boards and posts get staged differently, and a rear property line with no gate access means carrying posts by hand, which takes more labor hours than a short backyard run. Grading and drainage on an open lot also add scope: a swale that drains toward the fence line will trap water against wood posts, and we either set the posts above it or correct the grade before we set them. Outbuildings, shops and detached ADUs on the lot change the line and often need a gate with proper hardware so the structure can be reached without dragging on its footing. All of this is walked and scoped before a number goes on the page.
What a Typical Richardson Fence Job Involves
- Walk the line. We check post depth, the grade that drains toward or away from the fence, and any slab edge, shed footer or utility stub on the run.
- Locate before you dig. On older Richardson lots, utilities and footings get marked or located before the drill comes out.
- Set posts below the active soil zone. This is the single biggest defense against clay. It’s not a shortcut step and it’s not a place to save money.
- Frame and brace the gates. Gates get heavier bracing than the panel requires so they hold their line in a shrink-swell cycle.
- Rebuild, re-plumb, inspect. Panels go on, the run gets re-plumbed, and the gate swing is checked before we call it done.
If your fence line sits near an electrical wire, a gas line or any buried utility, do not dig around it yourself. We flag that as a job for a trained professional, and we work the location into the scope before any post is set.
We Also Serve Cities Near Richardson
Richardson sits in the middle of our north Dallas service area, and we regularly work the neighboring cities as well. If your project is in Plano, Addison, Carrollton or Allen, the same walk-the-line process applies, with the local permitting rules checked for that city. Call (844) 761-9152 and we’ll confirm coverage for your address.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Richardson

Richardson’s blackland clay swells and shrinks with the wet-dry cycle, so posts set in concrete heave and rack faster here than in the sandy ground north of the metroplex. That means post depth and drainage along the fence line matter more than board style. Those are the two items most likely to move the price, which is why a typical vinyl fence installation in Richardson runs $3,500 – $9,000 and a typical aluminum run runs $4,000 – $10,000. Call (844) 761-9152 for an exact quote – estimates are free.
Permit rules vary by where the fence sits. Fences inside the city of Richardson fall under the city’s rules, while acreage and unincorporated pockets at the county edge can fall under county permit requirements and setbacks, especially near a well or septic field. We confirm the applicable rule with the right permitting office before we quote a job. Call (844) 761-9152 and we’ll walk through what your property needs.
Yes, with the right planning. On an older Richardson lot the slab edge, shed footer or outbuilding footing on the fence line has to be located and worked around before digging, and a run that ties into an outbuilding needs a gate with proper hardware so the structure stays reachable. We walk and mark these during the estimate. Call (844) 761-9152 for a free walkthrough.
Water trapped against the post base, more than rain alone. A fence line graded flat or toward the fence holds water at the footing, and the blackland clay around it keeps that moisture in place. Rotting wood posts and rust at the chain link or iron footing usually trace back to that, plus posts set too shallow to drain. We check the grade as part of the scope before we quote. Call (844) 761-9152 to schedule your free estimate.
Upgrades and repairs change the price line by line, not as a surprise add-on. Heavier gate bracing, extra post depth in soft clay, a grade correction, and a utility location all get priced in the written estimate before work starts. The same goes for repairing an existing gate frame versus rebuilding it. Call (844) 761-9152 for a written line-item quote on the exact scope.
Get Your Free Fence Estimate in Richardson
Whether your fence line runs along a suburban backyard near US 75 or across an open acreage lot on the county edge, the quote should start with the ground. Construction McKinney walks the line, checks post depth and drainage, confirms the applicable permit rule, and puts every line in the written estimate before any post is set. Licensed and insured, free estimates, fixed pricing with no change orders. Call (844) 761-9152 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction McKinney.












