







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Farmers Branch
If you own a home in Farmers Branch, you already know the kitchens here were built for a different decade. Most of the ranches and post-war brick cottages in 75234 went up between the 1950s and 1970s, and the layouts, wiring and plumbing reflect it. We plan every Farmers Branch kitchen remodel around that reality: inspection first, allowances written into the contract, and any surprise priced and approved in writing before we touch it. Call (844) 761-9152 for a free estimate.
Why Farmers Branch Homeowners Call Construction McKinney for Kitchen Remodeling

Farmers Branch is small and fully built out. There’s no new housing going in, so almost all the kitchen work here is a remodel, a tear-down rebuild, or a redevelopment of an aging commercial strip along Valley View or the I-35E frontage. That changes how a kitchen job has to be run. Contractors here work around established lots, mature trees and older utility infrastructure that the newer suburbs to the north never deal with.
We bring the right scope for that kind of work: one contractor handling framing, electrical rough-in, plumbing, cabinets and surfaces so you aren’t coordinating between trades on a tight lot. Our technicians have up to 10 years of experience. You get a written line-item estimate up front, permits pulled and inspections passed, and a workmanship warranty behind the finished job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kitchen Remodeling Services in Farmers Branch
This is where the local knowledge matters most. A Farmers Branch kitchen is rarely a cosmetic refresh. It’s a 50- or 60-year-old room, and opening it up is where the real work shows itself.
Almost every ranch house and post-war brick cottage in 75234 was framed and wired before the mid-1970s. Pull a wall between the kitchen and dining room, and you’re likely to find undersized or aluminum branch wiring and framing that was never engineered to code. A neighboring suburb’s 1990s build would never reveal that. That’s why we scope every Farmers Branch kitchen by inspection first, not by a walkthrough. We open the walls, find what’s there, and price the corrections as written change orders you approve before drywall closes back up.
Here’s how that usually goes. Pulling the wall opens the layout and exposes a header that was never engineered, wiring feeding the range, and a subfloor softened by a slow leak under the sink. A qualified general contractor opens the walls under permit, prices the framing, rough-in and waterproofing corrections, and gets inspection sign-off before any drywall goes back. You approve each surprise in writing instead of finding it on the final invoice. That’s the whole difference between a quote that holds and one that balloons.
Kitchen Design & Layout
Most Farmers Branch layouts were built around a closed galley or a walled-off dining room. We design the new layout to fit the room you actually have, working around the load-bearing walls and the mature trees shading the kitchen windows. Site-built options let us match the home’s character rather than forcing a generic plan onto a 1960s footprint.
Cabinets & Countertops
Your kitchen can be built around KraftMaid or Wellborn cabinetry and a Cambria, Silestone or Caesarstone surface, so the materials are chosen to fit the room and the budget, not the other way around. On slab-on-grade floors that have shifted with the black-clay soil, we check level before the cabinets go in so the boxes don’t fight the floor.
Kitchen Island Installation
An island is often the centerpiece of a Farmers Branch rework, especially when the goal is to open a walled kitchen into the dining space. We design it to anchor the new layout, account for the wiring and plumbing that feed it, and get the waterproofing right underneath on floors that have already moved with the soil.
Backsplash, Tile & Flooring
Tile is where an older home’s movement shows up. We set tile and backsplash over a properly prepped substrate, and we never skip the waterproofing behind a backsplash or island just to save a day. Slab-on-grade flooring that has shifted from soil movement needs that detail handled first.
Trusted Brands We Service in Farmers Branch
We work with a curated roster of name-brand materials so you’re choosing the product, not just accepting what a single supplier pushes. Cabinetry comes from lines like KraftMaid and Wellborn. Countertops come from Cambria, Silestone and Caesarstone. Fixtures come from Kohler and Grohe. You pick the finish and the surface; we handle the sourcing and the turnaround. The written estimate names exactly what’s going in.
Common Kitchen Remodeling Problems We See in Farmers Branch Homes
- Bidding from a walkthrough, then hitting surprises mid-job. A contractor who quotes a 1960s ranch kitchen without opening the walls can run into load-bearing and wiring trouble with no allowances set aside. That’s the biggest reason a Farmers Branch quote moves.
- Cabinets installed before rough-in and inspection. Set the cabinets before the electrical or plumbing correction is signed off and you’re tearing them back out. We sequence rough-in and inspection first, always.
- Waterproofing skipped behind tile. A backsplash or island set over a slab-on-grade floor that has already shifted from clay soil movement will fail if the waterproofing isn’t done. We don’t cut that corner.
- Foundation movement showing up in the finish work. North Texas black-clay soil swells and shrinks with the wet-spring, dry-summer cycle. On older slab homes that shows up as cracked tile and cabinets out of level, so we check the floor before the finish goes down.
See the difference
Before
After
Before
After
Before
AfterPricing for Kitchen Remodeling in Farmers Branch, TX
A full kitchen remodel in Farmers Branch typically runs $14,000 – $45,000, and a small or partial remodel runs $9,000 – $20,000. Those are estimated ranges, and the written estimate sets your final price. What moves the number most is what the walls reveal: wiring, framing and waterproofing corrections on an older home. That’s why we price from an inspection and write allowances into the contract. Every estimate is free and line-item, so you see where each dollar goes. Call (844) 761-9152 to schedule yours.
We Also Serve Cities Near Farmers Branch
The same inspection-first approach covers the cities around Farmers Branch, including Addison, Carrollton, Richardson and Lewisville. If you’re planning a project across the line, our kitchen remodeling team handles it with the same written estimates and permit discipline. Call for a free estimate.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Kitchen Remodeling in Farmers Branch

Because the first quote usually skips the inspection, and opening a 1950s – 70s Farmers Branch ranch kitchen turns up wiring, framing and waterproofing that a newer suburban home wouldn’t. When those surprises hit mid-job with no allowances set aside, the price climbs. We inspect first, write allowances into the contract, and price any correction as a written change order you approve before we touch it. Call (844) 761-9152 for an exact quote, estimates are free.
Yes, most kitchens here require a permit, and opening walls on an older home triggers code upgrades once the inspector gets involved. That can mean correcting undersized wiring or non-code framing surfaced by the permit. We pull the permits, sequence the rough-in and inspection sign-off before cabinets or drywall, and keep you informed of each required upgrade. Call (844) 761-9152 to review your scope and estimates are free.
Because Farmers Branch is landlocked and built out, lots are established and often shaded by mature trees, so deliveries, dumpster placement and material staging take more planning than on a fresh lot. We plan access and staging up front so the job doesn’t stall. Call (844) 761-9152 to talk through your site, estimates are free.
A full remodel in Farmers Branch typically runs $14,000 – $45,000 and opens the layout, moves plumbing or electrical, and reworks the walls; a small or partial remodel runs $9,000 – $20,000 and keeps the footprint, refreshing cabinets, counters and surfaces. The written estimate sets the final price. Call (844) 761-9152 for an exact quote, estimates are free.
Cabinet installation typically runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500 and an island $3,000 – $10,000, with the full remodel range set above them. We itemize each line so you see the split, and the written estimate sets the final price. Call (844) 761-9152 for an exact quote, estimates are free.
Schedule Your Free Farmers Branch Kitchen Remodel Estimate
If you’re planning a kitchen in Farmers Branch, start with a walkthrough and a written line-item estimate. We open the walls, price what’s actually there, and put allowances in writing so you approve corrections before any drywall goes back up. One contractor, every phase, with permits pulled, inspections passed and a workmanship warranty behind the finished room. Call (844) 761-9152. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction McKinney.












